Roland TrueVIS VG3-640
Roland TrueVIS, vår storsäljande allt-i-ett lösning som har utvecklat tusentalt producenter världen över, tar nu ett stort steg in i vår digitala tidsålder. Öka er omsättning och ligg steget före med spjutspetens inom visuell kommunikation. Rolands Print/Cut maskiner är enkla, användarvänliga och har precis allt man begär av en modern storformatsskrivare.
- Intuitive touch screen control panel
- Integrated take-up unit
- Avery Dennison™ ICS™ and GREENGUARD Gold certified
- Prints ready to laminate and apply in 6 hours for same day installation
- VersaWorks 6 RIP software included
|
VG3-640 |
|
|||
Printing method |
Piezo ink-jet method |
|
|||
Media |
Width |
335 to 1,625 mm (13.2 to 64 in.) |
295 to 1,371 mm (11.7 to 54 in.) |
|
|
Thickness |
Max. 1.0 mm (39.3 mil) with liner, for printing |
|
|||
Max. 0.4 mm (15.7 mil) with liner and 0.22 mm (8.6 mil) without liner, for cutting |
|
||||
Roll outer diameter |
Max. 250 mm (9.8 in.) |
|
|||
Roll weight |
Max. 45 kg (99 lb.) |
Max. 35 kg (77 lb.) |
|
||
Core diameter |
76.2 mm (3 in.) or 50.8 mm (2 in.) |
|
|||
Printing/cutting width (*1) |
Max. 1,600 mm (62.9 in.) |
Max. 1,346 mm (52.9 in.) |
|
||
Ink |
Type |
TrueVIS INK 500 ml pouch (only white 250 ml) |
|
||
Colors |
Eight colors (cyan, magenta, yellow, black, light cyan, light magenta, light black, and white) |
|
|||
Eight colors (cyan, magenta, yellow, black, light cyan, light magenta, light black, and orange) |
|
||||
Eight colors (cyan, magenta, yellow, black, light black, orange, green and white) |
|
||||
Eight colors (cyan, magenta, yellow, black, light cyan, light magenta, orange, and green) |
|
||||
Seven colors (cyan, magenta, yellow, black, light black, orange, and green) |
|
||||
Four colors (cyan, magenta, yellow, and black) |
|
||||
Printing resolution (dots per inch) |
Max. 1,200 dpi |
|
|||
Cutting speed |
10 to 300 mm/s (0.39 to 11.8 in/s) |
|
|||
Blade force (*2) |
30 to 500 gf |
|
|||
Blade |
Type |
Roland CAMM-1 series blade |
|
||
Offset |
0.000 to 1.500 mm (0.0 to 59 mil) |
|
|||
Software resolution (when cutting) |
0.025 mm/step (0.98 mil/step) |
|
|||
Media heating system (*3) |
Print heater set temperature: 30 to 45 °C (86 to 113 °F) |
|
|||
Dryer set temperature: 30 to 55 °C (86 to 131 °F) |
|
||||
Connectivity |
Ethernet (100BASE-TX/1000BASE-T, automatic switching) |
|
|||
Power-saving function |
Automatic sleep feature |
|
|||
Power requirement |
100-120/220-240 Va.c. 50/60 Hz 8.0/4.1 A |
|
|||
Power consumption |
During operation |
Approx. 1,090 W |
|||
Sleep mode |
Approx. 50 W |
||||
Acoustic noise level |
During operation |
63 dB (A) or less |
|||
During standby |
53 dB (A) or less |
||||
Dimensions (Width x Depth x Height) |
2,886 mm × 748 mm × 1,320 mm (113.7 in. x 29.5 in. x 52.0 in.) |
2,632 mm × 748 mm × 1,320 mm (103.7 in. x 29.5 in. x 52.0 in.) |
|||
Weight |
203 kg (448 lb.) |
189 kg (417 lb.) |
|||
Environment |
During operation |
Temperature: 20 to 32 °C (68 to 89.6 °F), humidity: 35 to 80 % RH (no condensation) |
|||
Not operating |
Temperature: 5 to 40 °C (41 to 104 °F), Humidity: 20 to 80 % RH (no condensation) |
||||
Included items |
Dedicated stands, power cord, Media take-up unit, media holders, replacement blade for separating knife, cleaning liquid, drain bottle, User's Manual, Software(VersaWorks, Roland DG Connect), etc. |
||||
|
*1 |
The length of printing or cutting is subject to the limitations of the program. |
|||
|
*2 |
• 500 gf is the maximum instantaneous blade force. |
|||
• The blade force must be adjusted according to details such as the media thickness. |
|||||
|
*3 |
• Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment. |
|||
• Depending on the ambient temperature and media width, the preset temperature may fail to |
Roland
Sedan 1981... Roland DG North Europe A/S är ett dotterbolag till Roland DG Corporation från Japan. Roland DG Corporation tillverkar storformatsskrivare, skärplottrar, integrerade printrar/skärplottrar, gravyr- frÃäsmaskiner, laser scannrar och metall printrar. Dessa produkter används framför allt i den grafiska industrin. Folie & Papper är stolt Auktoriserad återförsäljare och Servicecenter för Roland DG produkter i Sverige med tekniker som kan titulera sig världens bästa.
Folie & Papper är din auktoriserade återförsäljare och servicecenter av Roland DG skärplotters och printers i Sverige sedan 2005.
Utforska vårt breda sortiment och beställ online idag!"
Köp skärplotter och printers från Roland DG i Sverige | Folie & Papper
http://www.rolanddgn.com